Ion vacuum pumps NMD-0,1 and NMDI-0,1

Ion vacuum pumps NMD-0,1 are used for oil-free extraction of gases and gas mixtures (air) from vacuum systems and creation of high and ultrahigh vacuum. Ion pumps NMD-0,1 are used as a part of vacuum processing equipment.

Ion pumps NMD-0,1 are not intended for extraction of inert gases and continuous pumping of hydrogen (inert gases and hydrogen can be pumped only as impurities in chemically active gases with atomic weight higher than 14). Their capacity is reduced if they are used to pump hydrocarbons. Inert gases can be extracted by ion pumps NMDI-0,1.

Ion vacuum pumps NMD-0,1 and NMDI-0,1

The pumps are supplied in a moderately cold climate modification category 4 according to GOST 15150. Ion vacuum pumps are powered by special power supply units (further – BPM), not included in the delivery package of the pump.

Ion pump NMD-0,1 are produced in two modifications of the connecting flange to the pump body: according to OST 11 868.007 (FO) and according to GOST 26526 (FG).

Example of identification code that can be used to order ion vacuum pump NMD-0,1:
- a pump with Dn-100 connecting flange to the pump body according to GOST 26526, with BPM-0,25 power supply unit for the pump: "NMD-0,1 pump TU-3648-002-42186869-2003, FG-100, with BPM-0,25 power supply unit";
- a higher-speed inert gas extraction pump with Dn-100 connecting flange to the pump body according to OST 11 868.007, without power supply unit: " NMDI-0,1 pump TU-3648-002-42186869-2003, FO-100, without BPM".

NOTE: Power supply units BPM for ion the pumps are supplied by a separate order, together with the pump or separately. Key features of NMD-0,1 and NMDI-0,1 vacuum pumps are shown in the table below. Design and basic dimensions of counter flanges of ion vacuum pumps are shown in the Appendix. Basic specifications of BPM power supply units recommended for our pumps are shown in General specifications of ion pumps.

Specifications of NMD-0,1 and NMDI-0,1 ion vacuum pumps

Parameter
NMD-0,1
NMDI-0,1
     
Maximum speed, l/sec (± 20 %)
- with nitrogen
100
80
- with argon
-
20
Maximum starting pressure, Pa
1
1
Maximum working pressure, Pa
2,0*10-3
2,0*10-3
Ultimate residual pressure, Pa
6,0*10-8
6,0*10-8
Recommended power supply unit
BPM-0,25; VAK 1200
BPM-0,25; VAK 1200
Weight (+5 %), kg
32,5
32,5
Connecting flange of the pump body according to OST 11 868.007 (FO)
- Dn, mm
100
100
- Pump dimensions (+5 max), mm
320 х 200 х 325
320 х 200 х 325
Connecting flange of the pump body according to GOST 26526 (FG)
- Dn, mm
100
100
- Pump dimensions (+5 max), mm
320 х 180 х 335
320 х 180 х 335

Our company Prizma LLC can design and manufacture other vacuum equipment similar to the available equipment, but with different parameters according to the customer’s specifications.