Vacuum resistance furnace SNVE-3.3.3/5
Vacuum resistance furnace SNVE-3.3.3/5 is used in various thermal processes (annealing, degassing, sintering, etc.) in vacuum at temperatures up to 500°С and small gas emissions where there is no interaction between the residual gases and components of the furnace.

Specifications of SNVE-3.3.3/5vacuum furnace
SNVE-3.3.3/5 |
|
Installed capacity, kW |
8 |
Rated capacity of the electric heaters of the furnace, kW |
6 |
Maximum temperature in the working area, °С |
500 |
Uniformity of temperature in the working area of the furnace at maximum temperature ±, °С |
5 |
Stability of the set temperature control by the automatic heating control system ±, °С |
1 |
Maximum temperature increase rate, °С / minutes |
20 |
Working area dimensions, L x W x H, mm |
300 х 300 х 300 |
Charge weight, not more than, kg |
20 |
Ultimate residual pressure in the heating chamber at temperature 500°С, Pa (mm hg) |
1,33*10-3 (1,0*10-5) |
Temperature of the external surfaces of the furnace, not more than, °С |
45 |
Rated voltage of the supply mains, V |
380/220 |
Nominal current frequency, Hz |
50 |
Number of phases of the furnace heater |
1 |
Furnace cooling water consumption, m3/hour, at pressure 2 … 3 kgs/sm2 |
1,5 |
Furnace dimensions, L x W x H, mm, not more than - production section - control panel |
1022x872x1877 645x590x1600 |
Weight of the furnace, not more than, kg - production section - control panel |
600 120 |
Our company LLC Prizma can design and manufacture industrial vacuum furnaces to your specifications. Please let us know the furnace parameters you require: temperature, working atmosphere, working area dimensions, charge weight etc., and the furnace will be specially designed according to your requirements.