Converter for hot slurry preparation KPSh-100
The converter is used to produce molding slurry by hot mixing and simultaneous degassing for subsequent slurry casting in moulds on die-casting machines.

Specifications of hot slurry preparation converter KPSh-100
Mixer drum volume, l |
100 |
Drum rotation speed, rpm |
35 |
Single raw material load, kg - Powder material with grain sizes 10... 140 microns and density 2,500 kg/m3 - Binder (paraffin) |
56 4 |
Drum jacket heating temperature, °C |
60...100 |
Temperature regulation accuracy in the automatic mode, °C |
± 5 |
Material and binder mixing time, not less than, minutes |
120 |
Material and binder are mixed by steel balls (not included in the delivery package) during the drum rotation. Weight of the steel balls, kg - diameter 10 mm - diameter 14 mm - diameter 18 mm |
30 18 12 |
Raw material and slurry are loaded/unloaded by ±45° tilting of the drum in the vertical plane by the electric drive |
|
Ultimate vacuum in the drum, Pa (mm hg) |
500 (5) |
Installed capacity, kW |
10 |
Heaters capacity, kW |
7,6 |
Rated voltage of the supply line, V |
380/220 |
Nominal current frequency, Hz |
50 |
Dimensions, LxWxH, mm - converter - control panel |
1670х1445х1250 510х470х1500 |
Weight, kg - converter - control panel |
500 60 |
Our company Prizma LLC can design and manufacture hot slurry preparation converters to your specifications.