Vacuum resistance furnace SNVE-3.6.3/16

Vacuum resistance furnace SNVE-3.6.3/16 is used in various thermal processes (annealing, sintering, etc.) at temperatures up to 1600 °С and small gas emissions where there is no interaction of atmosphere between the residual gases and components of the furnace.

The furnace is designed to be used in the premises meeting the requirements of the “Interindustry labor safety rules for heat treatment of metals” POT PM RM-005-97.

Vacuum resistance furnace SNVE-3.6.3/16

Specifications of vacuum furnace SNVE-3.6.3/16

 
SNVE-3.6.3/16
Installed capacity, kW
125
Rated capacity of the electric heaters of the furnace, kW
120
Maximum temperature in the working area, °С
1600
Uniformity of temperature in the working area of the furnace at maximum temperature ±, °С
10
Stability of the set temperature control by the automatic heating control system ±, °С
1
Furnace working area dimensions, W x L x H, mm
300 x 600 x 300
Charge weight, not more than, kg
400
Maximum working pressure in the heating chamber at temperature 1,500°С, Pa (mm hg)
6,5*10-3 (6,5*10-5)
Temperature of the external surfaces of the furnace, not more than, °С
45
Rated voltage of the supply mains, V
380/220
Nominal current frequency, Hz
50
Number of phases of the heater of the furnace
3
Furnace cooling water consumption, m3hour, at pressure 2 … 3 kgs/sm2
2,5
Furnace dimensions, L x W x H, mm, not more than

- production section
- control panel
- power supply unit


1790x1180x2300
930x930x1930
1520x700x800
Furnace weight, not more than, kg

- production section
- control panel
- power supply unit


1500
400
1100

Our company LLC Prizma can design and manufacture industrial vacuum furnaces to your specifications. Please let us know the furnace parameters you require: temperature, working atmosphere, working area dimensions, charge weight etc., and the furnace will be specially designed according to your requirements.